# Pine64+ LCD touchscreen config

**URL:** <https://dietpi.com/forum/t/pine64-lcd-touchscreen-config/951>\
**Category:** General Discussion\
**Created:** [31 January 2017 09:31 UTC](https://dietpi.com/forum/t/pine64-lcd-touchscreen-config/951 "2017-01-31T09:31:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Learnincurve](https://dietpi.com/forum/letter_avatar_proxy/v4/letter/l/e19adc/32.png) [@Learnincurve](https://dietpi.com/forum/u/Learnincurve)\
**Post date:** [31 January 2017 09:31 UTC](https://dietpi.com/forum/t/pine64-lcd-touchscreen-config/951/1 "2017-01-31T09:31:14Z")

</div>

Hi,

I’m new to DietPi, but have a (somewhat) working Armbian installation on my Pine64+ 2GB board.

In Armbian, using the 3.10.104 kernel, I can load the gt9xxf\_ts kernel module and set pine64\_lcd=on in /boot/armbianEnv.txt

In DietPi, the module seems to be missing and I tried adding “pine64\_lcd=on” and commenting out “optargs=disp.screen0\_output\_mode=720p60” in “/boot/uEnv.txt”

But a reboot simply overwrites the file with the original version.

Can anyone tell me what I’m doing wrong and if there is a way to enable the touchscreen?

Thanks for any help.

---

<div class="post-metadata">

**Author:** ![Fourdee](https://dietpi.com/forum/user_avatar/dietpi.com/fourdee/32/11_2.png) [@Fourdee](https://dietpi.com/forum/u/Fourdee)\
**Post date:** [27 May 2017 13:52 UTC](https://dietpi.com/forum/t/pine64-lcd-touchscreen-config/951/2 "2017-05-27T13:52:46Z")

</div>

> [@Learnincurve](#):
>
> In DietPi, the module seems to be missing and I tried adding “pine64\_lcd=on” and commenting out “optargs=disp.screen0\_output\_mode=720p60” in “/boot/uEnv.txt”

As per:  
[https://github.com/Fourdee/DietPi/blob/master/uEnv.txt#L1-L2](https://github.com/Fourdee/DietPi/blob/master/uEnv.txt#L1-L2)

You need to edit the file from the DietPi-RAMdisk location:

```plaintext
/DietPi/uEnv.txt

```