# Odroid HC4

**URL:** https://dietpi.com/forum/t/odroid-hc4/6361
**Category:** Requests
**Created:** [22 February 2022 22:59 UTC](https://dietpi.com/forum/t/odroid-hc4/6361 "2022-02-22T22:59:54Z")
**Posts on this page:** 1
**Showing post:** 6

<div class="post-metadata">

### Author: ![frank](https://dietpi.com/forum/user_avatar/dietpi.com/frank/32/2709_2.png) [@frank](https://dietpi.com/forum/u/frank)
#### Post date: [25 February 2022 16:23 UTC](https://dietpi.com/forum/t/odroid-hc4/6361/6 "2022-02-25T16:23:36Z")

</div>

Hi,

No I don’t know about it. But today I finally managed to get my HC4 working good on DietPi.  
See [https://github.com/MichaIng/DietPi/issues/5269#issuecomment-1050676202](https://github.com/MichaIng/DietPi/issues/5269#issuecomment-1050676202) for more details.

However, I am booting from SD and NOT from SSD.

I would first try to do an initial install of DietPi on SD (without the SSD mounted):

- using the latest image from today on DietPi-website
- after base-install, flash SPI/Petitboot with the following command

```nohighlight
flash_erase /dev/mtd0 0 0

```

- then run:

```nohighlight
sudo apt update && sudo apt upgrade

```

Finally verify that you can reboot the system by:

```nohighlight
sudo reboot now

```

If everything is working fine, you can go further and perform the steps to transfer the system to SSD.

The boot-partition (on SD) has changed a lot if compared to the old legacy one (buster kernel 4.9).  
So, if you made changes in the old boot.ini, that must be done in a different way I do not know.

These are next steps that I have to figure out: how to get the RTC-clock running and use the IR-remotecontrol to switch the system on or off.  
Maybe I’ll have to search in the Armbian- forums.

Grtz, Frank

---

_[View the full topic](https://dietpi.com/forum/t/odroid-hc4/6361)._