No space left on /boot when updating to 6.31.2

The updater is running into a no space left error when copying a file during

│  - Command: cp -Rf DietPi-master/dietpi /boot/                               │

It says:

│ cp: error writing '/boot/dietpi/patch_file': No space left on device         │

I’m stumped by this. I’ve used the log uploader. It said it uploaded something via ssh.dietpi.com

Can you see my log upload somwhere?

Sorry just noticed it gives me instructions on how to do that after I exit the updater. I’ll do it via Github.

Hi,

Many thanks for your report. Pls can you run df -h on your device and post the output.

Duplicate post created on GitHub https://github.com/MichaIng/DietPi/issues/3758

Filesystem      Size  Used Avail Use% Mounted on
udev            931M     0  931M   0% /dev
tmpfs           200M   12M  189M   6% /run
/dev/mmcblk1p2   15G  1.3G   13G  10% /
tmpfs           998M  2.1M  996M   1% /dev/shm
tmpfs           5.0M     0  5.0M   0% /run/lock
tmpfs           998M     0  998M   0% /sys/fs/cgroup
/dev/sda1       2.7T  1.6T  1.1T  60% /mnt/sata
tmpfs          1023M  8.0K 1023M   1% /tmp
tmpfs            50M  556K   50M   2% /var/log
/dev/mmcblk1p1   71M   71M  2.0K 100% /boot

your boot partition is completely full

/dev/mmcblk1p1   71M   71M  2.0K 100% /boot

And it’s extremely small, just 71 MB. I would recommend to extend the BootFS to at least 250 MB. This could be archived by using tools like
GParted https://gparted.org/ . This would allow you to resize partitions.

Thanks you can close this. I’ve resolved it via the help over on Github.