# NanoPi M2 - DietPi not booting

**URL:** https://dietpi.com/forum/t/nanopi-m2-dietpi-not-booting/6562
**Category:** Troubleshooting
**Created:** [26 April 2022 20:47 UTC](https://dietpi.com/forum/t/nanopi-m2-dietpi-not-booting/6562 "2022-04-26T20:47:18Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Thomas2009](https://dietpi.com/forum/letter_avatar_proxy/v4/letter/t/53a042/32.png) [@Thomas2009](https://dietpi.com/forum/u/Thomas2009)
#### Post date: [26 April 2022 20:47 UTC](https://dietpi.com/forum/t/nanopi-m2-dietpi-not-booting/6562/1 "2022-04-26T20:47:18Z")

</div>

Dear all,

first - I use Diet a very long time and using it to power my Raspberry Pi Zero - Managing all my Homebridgedevices 🕶

I ordered a NanoPi M2 board (cause it has 4 cpus and the price was so good…

But now I even can’t get this little sbc booting…  
  
  
I have no clue what I’m doing wrong…

I downloaded the 7z.image  
[https://dietpi.com/downloads/images/DietPi\_NanoPiM2-ARMv7-Bullseye.7z](https://dietpi.com/downloads/images/DietPi_NanoPiM2-ARMv7-Bullseye.7z)

Then used balenaEtcher to write to sd-card

then I power on and no blinking blue led 🤔  
  
  
Can anyone give me an advice???  
  
  
And I can’t find the new beta image 8.4 for the M2 as well  
  
  
Thank you very much for any advice  
Please be patient with me 🕶

---

<div class="post-metadata">

### Author: ![McGr3g0r](https://dietpi.com/forum/letter_avatar_proxy/v4/letter/m/b38774/32.png) [@McGr3g0r](https://dietpi.com/forum/u/McGr3g0r)
#### Post date: [7 September 2022 10:20 UTC](https://dietpi.com/forum/t/nanopi-m2-dietpi-not-booting/6562/2 "2022-09-07T10:20:43Z")

</div>

It seems that there is no s5p4418-nanopi2-rev05.dtb  
on the boot partition in the bullseye image.