# Everything broken

**URL:** <https://dietpi.com/forum/t/everything-broken/5315>\
**Category:** Troubleshooting\
**Created:** [14 May 2021 19:01 UTC](https://dietpi.com/forum/t/everything-broken/5315 "2021-05-14T19:01:08Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![KarlExler](https://dietpi.com/forum/user_avatar/dietpi.com/karlexler/32/5163_2.png) [@KarlExler](https://dietpi.com/forum/u/KarlExler)\
**Post date:** [14 May 2021 19:01 UTC](https://dietpi.com/forum/t/everything-broken/5315/1 "2021-05-14T19:01:08Z")

</div>

I ran my DietPi on a brand new Raspberry Pi 4 since some month using Plex, PiHole and SMB.  
Today I made the recommended update and now I even cańt connect via SSH… and all other services are down, too.

Is there a recommended way how I can repair the system?  
BR  
Karl

---

<div class="post-metadata">

**Author:** ![Joulinar](https://dietpi.com/forum/user_avatar/dietpi.com/joulinar/32/57_2.png) [@Joulinar](https://dietpi.com/forum/u/Joulinar)\
**Post date:** [14 May 2021 19:02 UTC](https://dietpi.com/forum/t/everything-broken/5315/2 "2021-05-14T19:02:50Z")

</div>

Hi,

if possible, try to connect a screen to check if there is any error message. Did you have done a backup before running the update?

---

<div class="post-metadata">

**Author:** ![WarHawk](https://dietpi.com/forum/user_avatar/dietpi.com/warhawk/32/21_2.png) [@WarHawk](https://dietpi.com/forum/u/WarHawk)\
**Post date:** [15 May 2021 22:20 UTC](https://dietpi.com/forum/t/everything-broken/5315/3 "2021-05-15T22:20:09Z")

</div>

I have found sometimes if things go wonky on the SD I have to pull it…put it into a Linux machine and run qparted on it and run a scan of the SD card

However seeing what is going on as Joulinar said would be the best avenue of approach…to see what is failing on boot

---

<div class="post-metadata">

**Author:** ![KarlExler](https://dietpi.com/forum/user_avatar/dietpi.com/karlexler/32/5163_2.png) [@KarlExler](https://dietpi.com/forum/u/KarlExler)\
**Post date:** [17 May 2021 06:31 UTC](https://dietpi.com/forum/t/everything-broken/5315/4 "2021-05-17T06:31:30Z")

</div>

Gentlemen  
It looks like “beginning new from scratch on” ☹

Any ideas are welcome.  
Kind Regards  
Karl

 ![error_message.jpg](https://dietpi.com/forum/uploads/default/original/2X/e/efeb28fa21ac3d60ee820811d86ef71166949d24.jpeg)

---

<div class="post-metadata">

**Author:** ![Joulinar](https://dietpi.com/forum/user_avatar/dietpi.com/joulinar/32/57_2.png) [@Joulinar](https://dietpi.com/forum/u/Joulinar)\
**Post date:** [17 May 2021 07:26 UTC](https://dietpi.com/forum/t/everything-broken/5315/5 "2021-05-17T07:26:42Z")

</div>

Hi,

can you place the SD card into another computer and have a look to boot partition of you see files that are marked as missing according your screen shot.

---

<div class="post-metadata">

**Author:** ![KarlExler](https://dietpi.com/forum/user_avatar/dietpi.com/karlexler/32/5163_2.png) [@KarlExler](https://dietpi.com/forum/u/KarlExler)\
**Post date:** [17 May 2021 08:03 UTC](https://dietpi.com/forum/t/everything-broken/5315/6 "2021-05-17T08:03:55Z")

</div>

Gents,

I have now access to the SD-Card. Under DOS I would write \<dir _._ /s \> allfromroot.txt\>. I´m quite sure that there is an equivalent under Linux.  
But… Does it make sense to post this file here? Is it helpful for you to support a system after a failed upgrade?  
BR  
Karl

---

<div class="post-metadata">

**Author:** ![Joulinar](https://dietpi.com/forum/user_avatar/dietpi.com/joulinar/32/57_2.png) [@Joulinar](https://dietpi.com/forum/u/Joulinar)\
**Post date:** [17 May 2021 08:19 UTC](https://dietpi.com/forum/t/everything-broken/5315/7 "2021-05-17T08:19:35Z")

</div>

well it depends on you if you like to invest the time to get your system back, even without guarantee that is is working or have other corruptions as well. Probably you have a backup that can be restored? Or you say, I don’t care, I’m going to start from scratch 🕶

---

<div class="post-metadata">

**Author:** ![KarlExler](https://dietpi.com/forum/user_avatar/dietpi.com/karlexler/32/5163_2.png) [@KarlExler](https://dietpi.com/forum/u/KarlExler)\
**Post date:** [17 May 2021 08:51 UTC](https://dietpi.com/forum/t/everything-broken/5315/8 "2021-05-17T08:51:03Z")

</div>

On more question. It seems that my system hangs very early… And I do not remember to installation… Is DietPi “sitting” on Raspbian… or is it a complete own system?

---

<div class="post-metadata">

**Author:** ![Joulinar](https://dietpi.com/forum/user_avatar/dietpi.com/joulinar/32/57_2.png) [@Joulinar](https://dietpi.com/forum/u/Joulinar)\
**Post date:** [17 May 2021 08:55 UTC](https://dietpi.com/forum/t/everything-broken/5315/9 "2021-05-17T08:55:57Z")

</div>

No, DietPi is not an own OS or Destro. DietPi is a set of scripts on top of a Debian base image. If you are running a Raspberry Pi, we use Raspberry OS. But it is an extrem slim/diet version of Raspberry OS with reduced amount of pre-installed packages.

---

<div class="post-metadata">

**Author:** ![KarlExler](https://dietpi.com/forum/user_avatar/dietpi.com/karlexler/32/5163_2.png) [@KarlExler](https://dietpi.com/forum/u/KarlExler)\
**Post date:** [17 May 2021 08:57 UTC](https://dietpi.com/forum/t/everything-broken/5315/10 "2021-05-17T08:57:38Z")

</div>

Even some more questions:  
Is it possible to install DietPi from my Mint Laptop directly on the SD-Card? Or must I do that directly on the PI?  
I forgot if I used 32 or 64 bit version for my RasPi 4 (latest version)

---

<div class="post-metadata">

**Author:** ![Joulinar](https://dietpi.com/forum/user_avatar/dietpi.com/joulinar/32/57_2.png) [@Joulinar](https://dietpi.com/forum/u/Joulinar)\
**Post date:** [17 May 2021 09:03 UTC](https://dietpi.com/forum/t/everything-broken/5315/11 "2021-05-17T09:03:09Z")

</div>

well you can flash the SD card directly on your Mint Laptop. It should work similar to the official RPi OS description

[https://www.raspberrypi.org/documentation/installation/installing-images/linux.md](https://www.raspberrypi.org/documentation/installation/installing-images/linux.md)

image file name would need to be adjusted 🕶
