Dietpi and btrfs

Hi all
I have DietPi on Tinkerboard with nextcloudpi installed. by default nextcloudpi is using btrfs, but it seems is not being suported/enabled module :

Disk /dev/sda: 349.3 GiB, 375049420800 bytes, 732518400 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 19CBAFA4-304A-4523-9711-5CC05E3B8C4E

Device     Start       End   Sectors   Size Type
/dev/sda1   2048 732516351 732514304 349.3G Linux filesystem

Command (m for help):



root@tinkerboard:~# mount /dev/sda1 /media/USBdrive
mount: unknown filesystem type 'btrfs'
root@tinkerboard:~#root@tinkerboard:~# lsmod
Module                  Size  Used by
8723bs               1232896  0
root@tinkerboard:~# modprobe btrfs
modprobe: FATAL: Module btrfs not found in directory /lib/modules/4.4.71+
root@tinkerboard:~#



NextCloudPi> , a ready to use NextCloud image for Raspberry Pi

If you have a Raspberry Pi, you have BTRFS support kernel build-in.

So I think, you have a Tinker Board with running NextCloud.

Official TinkerOS has not BTRFS support build-in.

But there is a unoffical custom image without support, which has preemptive kernel with ondemand performance governor, RAID support, reiserfs, btrfs, ntfs, fat32, cifs, autofs4, but no wifi.