# Camera Module 3 not detected on Raspberry Pi 3B+

**URL:** <https://dietpi.com/forum/t/camera-module-3-not-detected-on-raspberry-pi-3b/22826>\
**Category:** Troubleshooting\
**Created:** [21 February 2025 02:37 UTC](https://dietpi.com/forum/t/camera-module-3-not-detected-on-raspberry-pi-3b/22826 "2025-02-21T02:37:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rlue](https://dietpi.com/forum/user_avatar/dietpi.com/rlue/32/7557_2.png) [@rlue](https://dietpi.com/forum/u/rlue)\
**Post date:** [21 February 2025 02:37 UTC](https://dietpi.com/forum/t/camera-module-3-not-detected-on-raspberry-pi-3b/22826/1 "2025-02-21T02:37:35Z")

</div>

### Creating a bug report/issue

I have searched the existing open and closed issues

#### Required Information

- DietPi version | **9.10.0**
- Distro version | **bookworm 0**
- Kernel version | **Linux paisley 6.6.74+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.74-1+rpt1 (2025-01-27) aarch64 GNU/Linux**
- Architecture | **arm64**
- SBC model | **RPi 3 Model B+ (aarch64)**
- Power supply used | **[Geekworm X-UPS1](https://geekworm.com/products/x-ups1?_pos=10&_sid=02ea4e357&_ss=r) (4x 18650 UPS)**
- SD card used | **Samsung EVO Plus**

#### Additional Information (if applicable)

- ~~Software title | (EG: Nextcloud)~~
- ~~Was the software title installed freshly or updated/migrated?~~
- Can this issue be replicated on a fresh installation of DietPi? **It is occurring on a fresh installation of DietPi (but I have not tested on another).**
- ~~Bug report ID | `echo $G_HW_UUID`~~

#### Steps to reproduce

1. Connect Camera Module 3 to CSI port of Rasperry Pi 3B+
2. Enable **RPi Camera** under `dietpi-config` \> Display Options
3. `sudo apt install rpicam-apps-lite`

It should be noted that I did this on a **headless** install of DietPi.

#### Expected behaviour

- `rpicam-hello --list-cameras` should show the connected camera device, OR
- `vcgencmd get_camera` should show the connected camera device, OR

#### Actual behaviour

```bash
$ rpicam-hello --list-cameras
Could not open any dmaHeap device
No cameras available!

$ vcgencmd get_camera
Can’t open device file: /dev/vcio
Try creating a device file with: sudo mknod /dev/vcio c 100 0

$ ls -l /dev/vcio
crw------- 1 root root 10, 125 Feb 20 17:32 /dev/vcio

```

#### Extra details

Installing mjpg-streamer and/or motioneye (not sure which, I installed both at the same time) appears to resolve this problem? After installing them, I now see:

```bash
$ ls -l /dev/vcio
crw-rw---- 1 root video 10, 125 Feb 20 17:32 /dev/vcio

$ sudo usermod -aG video dietpi

$ rpicam-hello --list-cameras
Available cameras
-----------------
0 : imx708_wide_noir [4608x2592 10-bit RGGB] (/base/soc/i2c0mux/i2c@1/imx708@1a)
    Modes: 'SRGGB10_CSI2P' : 1536x864 [120.13 fps - (768, 432)/3072x1728 crop]
                             2304x1296 [56.03 fps - (0, 0)/4608x2592 crop]
                             4608x2592 [14.35 fps - (0, 0)/4608x2592 crop]

$ vcgencmd get_camera
supported=1 detected=0, libcamera interfaces=1

```

However, I couldn’t get either package to work. Per [this thread](https://dietpi.com/forum/t/mjpg-streamer-fails-to-start-with-dlopen-input-raspicam-so-cannot-open-shared-object-file-no-such-file-or-directory/22825), mjpg-streamer installs without the cruicial `input_raspicam.so` plugin, and so it fails to start. Motioneye launches and I can access the web interface, but adding a camera just shows a broken/empty video stream.

---

<div class="post-metadata">

**Author:** ![system](https://dietpi.com/forum/uploads/default/original/1X/7e1021de2213860bce185915ce2c1786e56490ec.png) [@system](https://dietpi.com/forum/u/system)\
**Post date:** [18 August 2025 14:38 UTC](https://dietpi.com/forum/t/camera-module-3-not-detected-on-raspberry-pi-3b/22826/2 "2025-08-18T14:38:15Z")

</div>

Closed on 18 August 2025 14:38 UTC

This topic was automatically closed 178 days after the last reply. New replies are no longer allowed.
