Supported hardware¶

Raspberry Pi¶

The Raspberry Pi has sold more than 31 million units since it launched in 2012. Any Raspberry Pi can serve as a secondary computer for email and web surfing. The real fun starts when you use your Pi for projects, which can range from robots to retro arcade machines to home media servers, security cameras and so on.

You can install DietPi by following the step by step Starting guide.

DietPi runs on the full range of Raspberry Pi boards and computers. This includes the newly launched Raspberry Pi 400,

or the most recent Raspberry Pi 4 Model B boards, launched in 2019, as well as in 2020.

DietPi runs also on one of the first models Raspberry Pi 1, launched in 2012

and even on the compact form Raspberry Pi Zero, both Zero W / WH and Zero 2 W

Odroid¶

ODROID single board computers are powerful, stable, and fast performing. They can function as a home theater set-top box, a general purpose computer for web browsing, gaming and socializing, a compact tool for college or office work, a prototyping device for hardware tinkering, a controller for home automation, a workstation for software development, and much more. For more details visit Hardkernel.com

ODROID-N2 is one of the supported boards.

It is a new generation single-board computer based on the Amlogic S922X SoC and the fastest we measured until time of writing. The main CPU of the N2 consists of a big.LITTLE quad-core Cortex-A73 + dual-core Cortex-A53 combination. Thanks to the modern 12nm silicon technology, the A73 cores run at up to 1.8 GHz (N2) respectively 2.4 GHz (N2+) without thermal throttling using the stock metal-housing heat sink allowing a robust and quiet computer.

PINE64¶

This is where PINE64 journey began. The PINE A64 is their first Single Board Computer powered by Allwinner’s A64 Quad-Core ARM Cortex A53 64-Bit SOC. For more details visit PINE64.org

The ROCKPro64 is the most powerful single board computer offered by PINE64.

It features a Rockchip RK3399 hexa-core SOC and up-to 4 GiB of dual-channel LPDDR4 system memory. Moreover, the board comes packed with features, including: an USB 3.0 and USB type C with DP1.2 port, a full PCIe x4 as well as eMMC module socket. You also get a 40pin header with I2C, SPI, UART and GPIO.

The board is backwards compatible with many of the existing PINE64 peripherals, including the WiFi/Bluetooth module, camera module and LCD panel but an array of new peripherals specific for the board is also available. All this in the exact same model “A” dimension as the original PINE A64.

The ROCKPro64 4 GiB board is designated as LTS (Long-term support) which means that PINE64 is committed to provide support for at least 5 years – until year 2023 and beyond.

The PINE64 family also contains the newer members Quartz64 and SOQuartz compute module.

Radxa¶

Maker Friendly, IoT connectivity enabled.

Radxa ROCK and Radxa Zero features maker friendly expansion options, including a 40-pin GPIO interface that allow for interfacing with a range inputs from buttons, switches, sensors, LEDs, and much more. For more details visit the Radxa ROCK resp. the Radxa Wiki website.

One of the supported boards is ROCK 4.

ROCK 4 is a Single Board Computer (SBC) in an ultra-small form factor that offers class-leading performance while leveraging outstanding mechanical compatibility. The ROCK 4 offers makers, IoT enthusiasts, hobbyists, PC DIY enthusiasts and others a reliable and extremely capable platform for building and tinkering their ideas into reality. It also features a Gbit LAN for network, with dedicated bus and controller, it works without latency under heavy load network applications.

Radxa Zero is an ultra thin SBC in small form factor with powerful performance based on Amlogic S905Y2. Radxa Zero features a Quad Core 64 ARM processor, 32bit LPDDR4, up to 4K@60 HDMI, 802.11 ac WIFI, Bluetooth 5.0, USB 3.0, 40-pin GPIO header. Radxa Zero supports USB 2.0 and power via one USB-C port.

Allo Sparky SBC¶

Sparky Single Board Computer (SBC) is a credit card-sized board that can be used as a standalone computer, in electronics projects, games, and also in many other applications. A true open hardware, community-supported embedded computer for developers and hobbyists. The Sparky SBC has all the functionality of a basic computer. For more details visit the Allo Sparky SBC website.

ASUS Tinker Board¶

Tinker Board is a Single Board Computer (SBC) in an ultra-small form factor that offers class-leading performance while leveraging outstanding mechanical compatibility. The Tinker Board offers makers, IoT enthusiasts, hobbyists, PC DIY enthusiasts and others a reliable and extremely capable platform for building and tinkering their ideas into reality. For more details visit the ASUS Tinker Board website.

Tinker Board features standard maker connectivity options, including a 40-pin GPIO interface that allow for interfacing with a range inputs from buttons, switches, sensors, LEDs, and much more.

Tinker Board is equipped with one DSI MIPI connection for displays and touchscreens. The secondary CSI MIPI connection is for connection to compatible cameras allowing for computer vision, and much more.

Careful consideration went into the design and development of the Tinker Board to ensure that it provides a superior user experience for first-time builders or for seasoned hobbyists. Builders appreciate the color-coded GPIO header, which makes it easy to recognize respective pin headers.

With the ASUS Tinker Board 2, a successor has been released, based on the 64-bit capable Rockchip RK3399 SoC.

NanoPi Series (FriendlyELEC)¶

FriendlyELEC’s next generation SBC - One of the fastest ARM SBC (RK3399) on the market today, with 2 x 1.8 GHz A72 cores and 4 x 1.4 GHz A53 cores. One of the smallest RK3399 SBCs available, a great addition to your SBC lineup that provides next gen SBC performance.

For more details visit the FriendlyELEC website.

NanoPi K2 supports DVFS and it can smooth play high-definition video streams, and it is very well suited for applications such as advertisement machines, TV boxes, home entertainment appliances or multimedia devices.

Orange Pi Series¶

Orange Pi is an open source product brand of Shenzhen Xunlong Software Co., Ltd, which focuses on providing cost-effective open source hardware, open source software and OEM/ODM services for individuals and enterprises worldwide.

For more details visit the Orange Pi website.

Orange Pi 5 uses Rockchip RK3588S new generation 8-core 64-bit processor, quad-core A76+quad-core A55, with 8nm process design, up to 2.4GHz main frequency, integrated ARM Mali-G610 GPU, embedded high-performance 3D/2D image acceleration module, built-in NPU with 6Tops computing power, with 4GB/8GB/16GB/32GB (LPDDR4/4x), and up to 8K display processing capability.

RISC-V based SBCs¶

The RISC-V platform is an open source ISA (instruction set architecture), where CPU or SoC device internals of the CPU core are transparent. This makes the technology interesting for combining it within the open source Linux orbit.

StarFive¶

StarFive is a RISC-V SoC and SBC manufacturer and offers the VisionFive 2, started as a Kickstarter project. The board contains a quad-core RISC-V JH7110 SoC, 2/4/8 GiB of RAM and many other bells and whistles of the Raspberry Pi type world.

PINE64¶

PINE64 is a RISC-V SoC and SBC manufacturer (see also PINE64 hardware support) and offers the STAR64. The board contains a quad-core RISC-V JH7110 SoC, 2/4/8 GiB of RAM.

Native PC & Virtual Machines¶

Native PC images¶

The Native PC images are great for those occasions where SBC performance just isn’t enough. Run one of these on any x86_64 PC/server and still get the same great DietPi features and experience. This image is for motherboards with UEFI boot support and onboard eMMC (e.g.: Z83-II, Beelink AP32 and other Intel NUC/SBC devices with onboard eMMC).

VMware¶

A VMware virtual machine, using e.g. VMware Workstation or Fusion, is great for those occasions where SBC performance just isn’t enough. Run one of these on any x86_64 PC/server (Windows, Linux, macOS) and still get the same great DietPi features and experience.

The VMware ESXi hypervisor, described as a “bare-metal hypervisor” aka Type-1 hypervisor, is part of e.g. the VMware vSphere hypervisor platform (“appliance server”). It allows to run and manage multiple virtual machines on one x86_64 machine. That way it can be compared to the Proxmox appliance server.

VirtualBox¶

VirtualBox is a general-purpose full virtualiser for x86 hardware, targeted at server, desktop and embedded use.

The VirtualBox virtual machine is great for those occasions where SBC performance just isn’t enough. Run one of these on any x86_64 PC/server and still get the same great DietPi features and experience.

Proxmox¶

Proxmox is a virtual machine and container platform, based on QEMU and KVM. It allows to run and manage multiple virtual machines and containers on a Linux OS via CLI and web interface, similar to how VMware’s vSphere and ESXi works.

Parallels¶

The Parallels Desktop virtual machine is great for those occasions where SBC performance just isn’t enough. Run one of these e.g. on any x86_64 macOS system (e.g. Mac mini 2011/2012/2014/2018) and still get the same great DietPi features and experience.

UTM¶

The UTM virtual machine is great for those occasions where SBC performance just isn’t enough. Run one of these on any macOS system (e.g. Mac mini 2011/2012/2014/2018 and M1 Apple Silicon) and still get the same great DietPi features and experience.

Hyper-V¶

The Hyper-V virtual machine is great for those occasions where SBC performance just isn’t enough. Run one of these on any x86_64 PC/server and still get the same great DietPi features and experience.

Make your own distribution¶

Unable to find an available image for your device?
Don’t worry, DietPi contains a script which can be used to turn an installed Debian-based OS into DietPi.

Basic information¶

The image generation is based on a shell script dietpi-installer:

• The script will convert any ‘bloated’ Debian/Raspbian installation into a lightweight DietPi system.
• The script will NOT support converting existing installed software (e.g. Nextcloud, Plex Media Server) over to the DietPi system.
• All existing software (APT) and user data will be deleted.

The script has to be executed on the running target system which you want to convert to a lightweight DietPi system, or when booting the original image as a container.

Prerequisites¶

Requirement 1: Ensure a Debian/Raspbian OS is running on the system:

• For best results, we recommend a fresh/clean minimal Debian/Raspbian installation.
• Native PC users: Please install Debian stable before hand: https://www.debian.org/distrib/netinst
• Desktop images should work, however, the minimal the image, the quicker the installation, as less packages will need to be removed.
  Remark: We do not support Ubuntu, or have any plans to do so.

Requirement 2: Packages which have to be installed in advance:

• Needed packages should already exist on most systems, however pure minimal images may require the following installations:

  apt update
  apt install -y curl ca-certificates systemd-sysv
  

Script execution¶

Execute the following shell command to download and execute the script:

bash -c "$(curl -sSfL 'https://raw.githubusercontent.com/MichaIng/DietPi/master/.build/images/dietpi-installer')"

In the following dialog you have to select the DietPi installer branch. Generally use master as long as you do not want to create a development image:

In the following dialogues enter your name and afterwards the actual image base and the device (SBC or PC) the system is running on:

Depending on whether you want to use the WiFi feature later on, you have to select the option to keep or purge the WiFi package. To keep the package could be the case if your hardware has an onboard WiFi or you add the WiFi e.g. via an USB WiFi adapter.

The last selection is the target Debian version: the current stable Bookworm or next testing Trixie.
After this, the script runs a couple of minutes, finally the following message occurs:

After this you can restart your system (reboot), alternatively you can copy the SD card (via dd) to an image (.img) to duplicate your base installation.

A further step can be to generate a compressed DietPi image via the dietpi-imager script:

bash -c "$(curl -sSfL 'https://raw.githubusercontent.com/MichaIng/DietPi/master/.build/images/dietpi-imager')"